Ponoko

Matboard - Ivory

0.106 inches

Ivory-matboard-103_large
There are 5 images for this material

What is it

Matboard has an 8-ply core with solid color throughout. This board is acid-free, lignin-free, and made from 100% alpha-cellulose fibers.

How fast will this material ship?

Orders using this material will ship as fast as same day. Find out more.

Can I get a sample?

You can get a sample here.

Design Notes

Matte cardboard finish that may have a slight texture.

Due to the thickness and ply core, the surface layer will tear when folded. Use a dashed cutting line to control the fold line.

Small light pieces can shift or get sucked into extraction during cutting, so provisions need to be made for this at the design stage.

To keep the material as clean as possible, both sides of the material have a protective paper applied prior to cutting. The protective paper is similar in color to the matboard so be aware that when you receive your parts you will need to peel the protective paper off to reveal your clean parts.

Engraving Matboard

Matboard engraves well.

There are 3 types of engraving possible with laser cutting. Area engraving, line engraving and a combination of both.

Area engraving is great if you need to mark a larger area on the surface of the material. To specify area engraving set your shapes to have a fill color of black with RGB values of 0, 0, 0. The way this engraving is performed is like an old dot matrix printer except instead of dots of ink it uses pulses of the laser beam. This is a surface finish not deep enough to be used for pocketing or inlays. The depth of the engraving ranges between 0.1-0.5mm.

Line engraving is like a really shallow cut. To achieve this effect the stroke color to red with RGB values of 255, 0, 0 and set the stroke style to a width of 0.01 mm. The laser beam follows along the red lines that you have in your design and marks the surface of the material. The result is crisp but it can be a time-consuming technique if you have a lot of small details like text.

Using a combination of both engraving types typically gets the best result. Set your shapes to have a fill color of black with RGB values of 0, 0, 0, the stroke color to red with RGB values of 255, 0, 0, and set the stroke style to a width of 0.01 mm. The line engraving causes the laser beam to trace around the edges of the engraved areas making them more crisp and bringing the details to life.

Construction Techniques

Creating structures from card can be a great way to test out your complex designs. Slotting, stacking and folding shapes all work well to create 3D form.

Typical Uses

Cardstock is typically used packaging, prototyping, architectural models, decorative arts, collage, and craft, etc

Environmental Information

100% recyclable.

Adhesives, joints, and fastenings

Can be easily joined with a wide range of glues and tapes.

Tips from other designers


Sign up for our newsletter
to get special offers: