Ponoko

Plywood - Gaboon Marine

0.240 inches

Plywood_-_gaboon_marine_-_edge_large
There are 5 images for this material

What is it

5 ply laminated material manufactured from 100% Okoume hardwood logs. Generally pale pink to brown in colour with a
straight to slightly wavy grain and an even medium texture. . A marine bonded exterior makes it suitable for outdoor use, however a clear coat is recommended.

How fast will this material ship?

Orders using this material will ship as fast as same day. Find out more.

Can I get a sample?

You can get a sample here.

Design Notes

This plywood is constructed from clear face veneer with occasional knots. Being a natural material the plywood can potentially warp which affecting the flatness of parts.

Grain direction will always run horizontal as drawn on the computer screen.

The manufacturers tolerance for the thickness of the materials is as follows:

Material thicknessPossible Range
4.0mm3.4 - 4.6mm
6.0mm5.1 - 6.9mm


Engraving Plywood

There are 3 types of engraving possible with laser cutting. Area engraving, line engraving and a combination of both.

Area engraving is great it you need to mark a large area on the surface of the material. To specify area engraving set your shapes to have a fill color of black with RGB values of 0, 0, 0. The way this engraving is performed is like an old dot matrix printer except instead of dots of ink it uses pulses of the laser beam. This is a surface finish not deep enough to be used for pocketing or inlays. The depth of the engraving ranges between 0.1-0.3mm.

Line engraving is like a really shallow cut. To achieve this effect the stroke color to red with RGB values of 255, 0, 0 and set the stroke style to a width of 0.01 mm. The laser beam follows along the red lines that you have in your design and marks the surface of the material. The result is crisp but it can be a time consuming technique if you have a lot of small details like text.

Using a combination of both engraving types typically gets the best result. Set your shapes to have a fill color of black with RGB values of 0, 0, 0, the stroke color to red with RGB values of 255, 0, 0, and set the stroke style to a width of 0.01 mm. The line engraving causes the laser beam to trace around the edges of the engraved areas making them more crisp and bringing the details to life.

Typical Uses

Plywood is commonly used for making scale models, jewelry, model boats, model airplanes, product housings, drones, clocks, prototyping, signage, etc.

Adhesives, joints and fastenings

Construction adhesives will bond well. Follow the adhesive manufacturer's instructions for application processes. Screw joints should be pre-drilled to avoid splitting.

Tips from other designers


Sign up for our newsletter
to get special offers: