Upholstery Leather - Mocha

0.039 inches

There are 5 images for this material

What is it

Upholstery grade leather.

How fast will this material ship?

Orders using this material will ship as fast as same day. Find out more.

Can I get a sample?

You can get a sample here.

Design Notes

A chocolaty brown colored leather that has a full grain leather finish on one side and a suede like finish on the other.

The 'antique' nature of the finish makes the leather look aged and worn in. This includes 'cracking' in the color and color variation. Some natural imperfections could appear on the surface of the leather.

This leather is ideal for interior design applications and a favorite choice amongst Interior Designers.

Unlike other materials leather will be shipped without the surrounding material sheet. The sticky paper we normally use to hold all cut pieces within the surrounding material can damage the surface of the leather so we opt to individually pull designs off the laser and bag them for shipping. Add a cutting line around all pieces of the leather that you want to have shipped.

Engraving Leather

Leather will turn brown and powdery when engraved so large areas of engraving are not recommended. Line engraving produces crisp results and is recommended over area engraving

There are 3 types of engraving possible with laser cutting - area engraving, line engraving and a combination of both.

Area engraving is great it you need to mark a large area on the surface of the material. To specify area engraving set your shapes to have a fill color of black with RGB values of 0, 0, 0. The way this engraving is performed is like an old dot matrix printer except instead of dots of ink it uses pulses of the laser beam. This is a surface finish not deep enough to be used for pocketing or inlays. The depth of the engraving ranges between 0.1-0.5mm.

Line engraving is like a really shallow cut. To achieve this effect the stroke color to red with RGB values of 255, 0, 0 and set the stroke style to a width of 0.01 mm. The laser beam follows along the red lines that you have in your design and marks the surface of the material. The result is crisp but it can be a time consuming technique if you have a lot of small details like text.

Using a combination of both engraving types typically gets the best result. Set your shapes to have a fill color of black with RGB values of 0, 0, 0, the stroke color to red with RGB values of 255, 0, 0, and set the stroke style to a width of 0.01 mm. The line engraving causes the laser beam to trace around the edges of the engraved areas making them more crisp and bringing the details to life.

Typical Uses

Leather is typically used for crafts, wallets, cuffs, bags, clothing, etc.

Adhesives, joints and fastenings

Rivets and common sewing techniques will work for joining this material.

Laser cut thread holes and pieces can be stitched neatly by hand.

Tips from other designers

Erik says:

Does anyone know how opaque this materials is when held up to a bright light? I'm considering it far a camera bellows.
I would reinforce it with another more rigid material but not on the creases and I'm worried about light passing through.

Added over 7 years ago. ( delete )
Josh says:

Hi Erik! I just had a look at a piece I have here and it's very opaque - I didn't notice any light coming through myself - except through my sewing holes.

Added over 7 years ago. ( delete )

Sign up for our newsletter
to get special offers: