Ponoko - All items tagged with slot

Popsicle Choker

STYMMETRY — Sat, 19 Apr 2008 06:50:47 GMT

The Popsicle Choker is a rigid wooden necklace for assembly by the user. Each of the 32 pieces are identical. Can also be worn on the head as wreath. These pieces are currently made from wood due to the unknown tolerances of plastics, but hopefully after some testing it will be available in acrylic (as depicted).

Scrabble Necklace

STYMMETRY — Sat, 19 Apr 2008 06:50:47 GMT

The Scrabble Choker uses a similar but different technique of construction. Each component is cut and etched with a letter and point value, just like real scrabble pieces! Constructing the necklace allows you to express some personality. Anything that can be said in 48 letters is possible! These pieces are currently made from wood due to the unknown tolerances of plastics, but hopefully after some testing it will be available in acrylic (as depicted).

Bloom Table Lamp

alienology — Thu, 04 Jun 2009 22:57:06 GMT

Introducing the Bloom Table Lamp by Alienology! Bloom Table Lamp’s intriguing form is a result of exploration in using modern manufacturing method (laser-cutting) and attempting to minimize the material waste by optimizing the design pattern. Lamp is designed to fit on single sheet of P3 sized (790mm x 384mm) material. Individual parts create interlocking pattern on a flat sheet, so that there is minimum material waste. This version of the lamp is made out of Eurolite plywood and it can be assembled in about 10 – 15 minutes. Ships flatpack. Bloom Table Lamp comes with: - all wood parts needed to assemble the lamp in about 10 – 15 minutes - 40W spiral energy efficient light bulb - socket and 11’white cord with switch and plug Size: Height 37cm x diameter 25cm (14.5” x 9.8”) Note: Only plywood lams available at this time. Acrylic versions coming up soon. See also related, hanging, “Bloom Lamp” available on Ponoko

Bloom Lamp

alienology — Sun, 26 Jul 2009 17:10:42 GMT

Introducing the Bloom Lamp by Alienology! Bloom Lamp’s intriguing form is a result of exploration in using modern manufacturing method (laser-cutting) and attempting to minimize the material waste by optimizing the design pattern. Lamp is designed to fit on single sheet of P3 sized (790mm x 384mm) material. Individual parts create interlocking pattern on a flat sheet, so that there is minimum material waste. This version of the lamp is made out of Eurolite plywood and it can be assembled in about 10 – 15 minutes. Ships flatpack. This lamp is meant to be “swag style” hanging lamp, perfect for mounting in a living room corner. On request, it is also available with different hardware supplied (porcelain candelabra bulb socket with 53” adjustable cord), so it can be mounted in already existing ceiling power hookup (chandelier style). Bloom Table Lamp comes with: - all wood parts needed to assemble the lamp in about 10 – 15 minutes (+ two extra shading ribs, just in case, you know… :) ) - 40W spiral energy efficient light bulb - socket and 15’white cord with switch and plug - two ceilining hooks to thread lamp cord to the plug outlet Size: Height 24cm x diameter 28cm (9.5” x 11”) Note: Only plywood lams available at this time. Acrylic versions coming up soon. See also related “Bloom Table Lamp” available on Ponoko.

Twirl Lamp .01

alienology — Wed, 10 Jun 2009 23:04:09 GMT

Introducing the Twirl Lamp (.01) by Alienology! Twirl lamp is hanging / pendant lamp designed out of single sheet of P3 sized, 4mm thick plywood. It is made out of nesting set of curvy ribs perfectly interlocking on a flat sheet, thus minimizing material waste. By arraying the lamp ribs in various ways, many different forms can be achieved with one kit of parts. So the end user is able to provide their own personal touch to this modern design. Lamp is designed to fit on single sheet of P3 sized (790mm x 384mm) material. This version of the lamp is made out of Eurolite plywood and it can be assembled in about 10 – 15 minutes. Ships flatpack. Twirl Lamp (.01) is meant to be “swag style” hanging lamp, perfect for mounting in a living room corner. On request, it is also available with different hardware supplied (porcelain candelabra bulb socket with 53” adjustable cord), so it can be mounted in already existing ceiling power hookup (chandelier style). Twirl Lamp (.01) comes with: - all wood parts needed to assemble the lamp in about 10 – 15 minutes - 40W spiral energy efficient light bulb - socket and 15’white cord with switch and plug - two ceilining hooks to thread lamp cord to the plug outlet Size: Height 38cm x diameter 30cm (15” x 11.8”) Note: On the photos is wood ply (Eurolite) version of the lamp. Bamboo ply version coming soon. See also related “Bloom Table Lamp” available on Ponoko.

Spore Floor Lamp

alienology — Thu, 01 Oct 2009 23:44:15 GMT

Introducing the Spore Floor Lamp by Alienology! Spore Lamp is a floor lamp designed out of single sheet of plywood, 5mm thick . It is made out of nesting set of curvy ribs perfectly interlocking on a flat sheet, thus minimizing material waste. This version of the lamp is made out of Birch Plywood., and it can be assembled in about 10 – 15 minutes. Ships flatpack. Spore Floor Lamp comes with: - all wood parts needed to assemble the lamp in about 10 – 15 minutes - 40W spiral energy efficient light bulb - socket and 15’ cord with switch and plug Size: Height 70cm x diameter 26cm (27” x 10.2”)

Simple i-pad Stand: Acylic

simpleipadstand — Fri, 04 Feb 2011 16:33:04 GMT

A simple i-pad stand that fold flat so that it can be easily stored. Slots together easily and quickly. This one is made from Acrylic. We suggest Transparent Red or Clear but other color can be chosen. More details at http://www.simpleipadstand.com/

Simple i-pad Stand: Wood

simpleipadstand — Thu, 10 Feb 2011 21:17:44 GMT

A simple i-pad stand that fold flat so that it can be easily stored. Slots together easily and quickly. This one is made from Wood. Depending on your country this will be either MDF or Plywood. More details at http://www.simpleipadstand.com/

Pacman Enclosure + wheels

Guolivar — Tue, 31 Jan 2012 21:35:14 GMT

Based on the boxotron script but simplified to just 4 screws, this design is for the Particles, Activity and Context Measurement Autonomous Node (PACMAN) designed by Gustavo Olivares from NIWA (NZ)