Ponoko - All items tagged with pencil holder

Spiral Pencil Holder

BenScheele — Sun, 30 Nov 2008 05:35:08 GMT

A nifty slide-together box with dividers inside, that can be used to store pencils, pens, or tools. It has graphics on it that I made in POV-Ray. Also includes an 11x11 cm coaster made from the scrap, with a vector spiral carved onto it that mimics the main graphic motif. The internal volume is 259cc or 15.8 cubic inches, and its exterior dimensions are 137 mm square by 111 mm height (5.39 in. square x 4.37 in.). The photos are from before a minor revision.

5UP Pencil Sharpener (SVG)

FlightsofIdeas — Fri, 16 Jan 2009 14:39:41 GMT

Published in Wired Magazine 17.01 This is a design that I put together for PonokoID ponoko.com/ponoko-id. I came up with the design based on the requirements for a Wired Magazine article. It's a fun and simple design that can be made with a few odds and ends from the local hardware store. I really want to see someone come up with a 5UP design that looks like 5 health bars out of a computer game. Enjoy. The design is free of charge. You can use it on the proviso that you share a small part of your personal expertise in the education of others. You can do this in any way that you wish and your contribution need only be small. If you’re a busy person then you can always contribute to a charity like The Fred Hollows Foundation http://www.hollows.org. For the Wired Article online, see http://www.wired.com/culture/design/multimedia/2008/12/pl_create Toss Your Most Brilliant Product Ideas Into Ponoko.com's Fishbowl By Sonia Zjawinski ... "What We Wanted A pencil holder that doubles as a sharpener. What We Got Frosted acrylic guides channel the pencils into store-bought sharpeners. A handle provides leverage, and the rear panel can be removed for cleaning out the shavings." ... Instructions I've put all of the objects into the one SVG file, although you may want to cut the body and guides out of different materials, as shown in the photographs. The box base should be cut from 6mm material. The pencil guides can be any thickness. The original SketchUp file that I created can be downloaded from Thingiverse http://www.thingiverse.com. You can modify it and then use my "SketchUp SVG Outline Plugin" http://code.google.com/p/sketchup-svg-outline-plugin/ to create different SVG files. See my Instructables http://www.instructables.com/member/flightsofideas/ for more information. The design fits 10x5mm (0.6x0.4in) single hole sharpeners and 6mm (1/4in) threaded rod. There are holes to allow 2M screws which give it a steampunk-ish look. You will also need a handle (you may need to change the spacing and diameter of the screw holes). A cabinet magnet can also be used to keep the rear panel firmly in place. To assemble, glue the box together with PVA or another clear-drying glue. If using ply for the base, simply drive the screws in by hand. If using something like acrylic you will have to pre-drill and perhaps tap holes into perpendicular edges. Use epoxy to glue the sharpeners in place. You may also want to modify the design to include a channel for shavings if the sharpening blade does not sufficiently clear the 6mm material. You can also attach the cabinet magnet (optional) at this stage to the rear panel. Once dry, use the threaded rod to fasten the guides into place. Use nuts and washers to sandwich the guides and the top panel of the box. Add dome nuts to the tops of the threaded rods. To get the threaded rod to the length that I wanted, I simply used a Dremel to cut a single 2ft piece into 6 segments. Attach a nice handle to the box, add pencils, and start sharpening.

5UP Pencil Sharpener (EPS)

FlightsofIdeas — Fri, 16 Jan 2009 14:38:32 GMT

Bessel pencil holder

mShapes — Sun, 30 Dec 2012 00:01:34 GMT

This is a Bessel function-shaped pencil holder. It's the 3D plot of a Bessel function of the first type, with alpha = 3.

Neuron Cube - Pencil Holder - By Dizingof

Dizingof — Wed, 23 Jan 2013 01:46:36 GMT

Unique pencils holder designed with 3D Voronoi. Size:100x100x100mm Thickness: 1~4mm Turntable GIF: http://i1080.photobucket.com/albums/j322/dizingof/Album3/Neuron-Cube-Pencil-Holder-by-Dizingof-anigif_zpsac844bd9.gif 3D Print it with your favorite material or on your personal 3D Printer.

Voronoi Pencils Holder By Dizingof

Dizingof — Mon, 06 May 2013 21:19:47 GMT

A unique Voronoi cube structure with different angles orientation designed as a unique 'Math Art' pencils holder for your desk. Size: 100mm cube Thickness: 2 to 4mm (strong structure) Material Volume: 50 cubic cm. 3D Print it with your favorite material or on your personal 3d printer.