Ponoko - All items tagged with mini

happy cloud charm

laserkitty — Sat, 22 May 2010 12:44:29 GMT

Wouldn't you enjoy having a little smiley cloud/chunk of mold/hunk of lint attached to your cellphone/keys/purse/odd piercing? I KNOW I WOULD! Made of acrylic plastic and attached to a charm strap. Please choose between pink, light blue, mint green, white, black, or silver! :) Measures approximately 0.5" (1cm) across.

mini sumo chassi

OALAYFZ5 — Tue, 01 Mar 2011 03:07:29 GMT

this is my mini sumo chassi. It is the first design and im hoping to make improvements. The robot is designed around hitec hs422 servos and is made to start standing up because of the 10x10 cm and 500g limit.

MINI Cooper 2007-2012 door 6" speaker adapter ring

FlyingLotus1983 — Tue, 29 Nov 2011 18:40:18 GMT

Allows a 6" (up to 7.1" in some cases) speaker to be mounted to a 2007-2012 MINI Cooper in the lower door location. Some fabrication is involved. You must cut the plastic grilles off of the stock door panels, and enlarge the hole to fit the speaker basket. Next, glue two adapter rings together with wood glue (you get four pieces total which makes two adapters, one for the passenger side and one for the driver side). Make sure to coat with wood sealer. You may use wood screws or socket head cap screws to hold the speaker in place. You will need tee nuts on the back side if you're using socket head cap screws. Use non-hardening modelling clay to fill in the gaps between the bracket and the door panel. See link below for more details: http://www.diymobileaudio.com/forum/build-logs-project-install-gallery/118147-2011-mini-cooper-s-sq-build-hat-jl-alpine-knu-secondskin-sds-pwk.html

Arduino(TM) Pro Mini Full Kit w/Enclosure

TerawattIndustries — Fri, 21 Sep 2012 22:02:13 GMT

Arduino Pro Mini 5v/16Mhz with (2x) custom enclosure and USB Micro breakout board for power. Comes with hardware listed. Shipped to you from Ponoko and Sparkfun. Parts include: Parts: - 1x Arduino Pro Mini 5v/16Mhz - 2x Acrylic Enclosures (see below) - USB Micro Breakout Board - Assembly hardware - Assembly instructions - 10x 4-40 bolts; - 10x 4-40 standoffs 1/2" - 4 Silicone pads (feet) Enclosure: - Dimensions: 64mm x 45mm x 25.5mm - Your choice of Green, Pink, Blue - Case has cutout for female or male headers on all pins except A4, A5. - One (1) cutout for USB-Micro. (3mm x 8mm) - One (1) cutout for square IC/Sensor for ex: light sensor, LED. (2mm x 6mm) - 2x acrylic L-bracket for mounting Arduino to case. - Assembly instructions Enclosure is assembled with glue on the bottom and four (4) sides. The top is fastened by 1.25" screws + nuts. You'll need cement or glue that works with acrylic. The Arduino chip is mounted to the enclosure with an acrylic L-bracket that comes with the kit. The USB Micro breakout board is fastened with (2) screws and bolts. Due to the way Sparkfun and Ponoko package some hardware you might have leftover hardware.

Mini Dinosaur

RareBreed — Sat, 12 Jan 2013 06:19:43 GMT

Small colored & textured dinosaur for 3d print. 1:200 scale model replica about 2'' L x 1.2'' H x 1'' W (inches) from RareBreed's Prehistoric Collection ©2012. Available: http://therarebreeds.weebly.com

Pterosaur

RareBreed — Sat, 12 Jan 2013 06:19:17 GMT

Sauropod

RareBreed — Sat, 12 Jan 2013 06:18:44 GMT

Mastodon

RareBreed — Sat, 12 Jan 2013 06:23:34 GMT

Wooly Rhinoceros

RareBreed — Sat, 12 Jan 2013 06:20:26 GMT