Ponoko - All items tagged with home

Raum3 - Magazine Rack

allesprodukt — Sun, 21 Dec 2008 08:12:34 GMT

4mm plywood. This design requires no glue. Although for better stability you can add a little bit where the both sides join the base. Please let me know if you have any suggestions or problems with the design.

Orangeblossom Felt Coasters

infraredstudio — Fri, 10 Apr 2009 16:30:20 GMT

Set of 4 laser cut felt coasters in red orange wool for made of the modern home. Water resistant and bold. 3 inches in diameter + 3mm thick. Look for more felt coasters and hot pads (that's the Minnesota term for trivet).

Votive Candleholder - clear

Whystler — Wed, 01 Apr 2009 04:15:29 GMT

Votive holders have the formal look of a candlestick partnered with the ease and convenience of standard votives or tealights. The three legged design offers a new interpretation of art nouveau sensibilities. You get two pieces (7 inches tall and 5 inches tall) excuted in crystal clear acrylic. They are shipped flatpack and arrive ready for easy snap-together assembly.

Igor Laboratory Lamp

Whystler — Fri, 24 Jul 2009 00:27:37 GMT

A special gift from your favourite lurching, mishapen, but warm hearted assistant! Igor Lamp embodies the soul of invention and its satisying glow will light the way to many a breakthrough in your lab. Using its dimmer switch, you set the mood for low-lit contemplative research or bright, window-blazing illumination. This item comes to you in two shipments. Bamboo pieces arrive diectly from Ponoko. Sockets, bulbs, knob, and instructions arrive separately from vendor. Some easy assembly is required (ie. removing laser backing and slotting together the bamboo box) All electrical parts come assembled and wired properly. Then, all you need to do is insert the electrical assembly into the box and snap on the knob as per instructions.

Corner Christmas Tree Stand for a tiny 90 Degree tree

DS4design — Mon, 09 Nov 2009 03:09:21 GMT

Tiny Christmas Tree Stand designed to fit in the corner of an apartment or office where space is at a premium. Cut the tree down to where there's only 90 degrees of a tree there, and push it up against the corner and there ya go!

Simple Sconce

Malengine — Fri, 17 Sep 2010 20:38:01 GMT

This elegant yet simple sconce has a large hole in the flat rear section to fit over existing fixtures or integrate with new construction. The matte finish on one side of the styrene diffuses and directs light, and can be reversed to give two different effects; the standoffs keep it firmly in place on a moderately textured wall. It wipes clean easily with a damp rag. Assembly: simply remove the cut pieces and peel off the paper backing that protects the finish. Bend the large piece and insert the L-shaped standoffs through the slots: slide up and insert the smaller locking tabs into the provided slots. Using the large circular hole on the flat back section, affix to your existing wall fixture.

NZ Birds Fridge Magnets

toonshop — Sun, 10 Jul 2011 13:51:58 GMT

Acrylic Fridge Magnets 5 Birds from New Zealand: Kiwi, Fantail, Pukeko, Kea and Weka Chick Each magnet is approximately 10cm x 10cm Warning: On the picture, the acrylic is green tint since it was made by NZ lab. This color is not available in the US lab!

Doggy Lamp/Desk Organizer

Toglefritz — Thu, 29 Dec 2011 17:14:22 GMT

The Doggy Lamp/Desk Organizer is an artistic, dog-shaped lamp that doubles as a place to store office supplies. It is assembled from laser-cut wooden parts and some bolts. The light itself is controlled by an Arduino Uno microprocessor and is capable of emitting red, blue, green, or white light in addition to the option of slowly fading from red to blue to green in a cycle.

Beware of Dog sign 12 inches

sidnaique — Fri, 17 Feb 2012 17:07:04 GMT

This is a printable/3d print ready Beware of Dog sign. Hollow model to keep the printing cost low, completely watertight mesh, no pseudo surfaces, minimum wall thickness > 1.0mm, checked with netfabb. Renders are done using final STL file, that means You get exactly what you see in the images. This is a 12 inch version, please contact for more sizes. Dimensions: 12.0 w x 4.85 d x 8.09 h inches Vol: 585.58 cm³ Please check out my Showroom for other printable signs and figurines/sculptures. sidnaique Note: 1. Bolts not included