Ponoko - All items tagged with hexacopter

Hexacopter Multicopter Y6 Frame

AIMatt — Wed, 03 Apr 2013 02:41:28 GMT

These are plans for a Y6 hexacopter frame. Add 3 aluminum or wood arms and some M3 nylon bolts, 8 8-32 bolts and M3 standoffs, and you've got a frame. It's got a top and bottom plate, a battery plate, 6 motor mounts, 3 legs (need to be heated and bent for acrylic) and an electronics guard plate.

Peregrine Falcon Hexacopter Y6

AIMatt — Tue, 14 Aug 2012 02:58:03 GMT

These are plans for a Y6 hexacopter frame shaped as a peregrine falcon. Add 3 aluminum or wood arms and some M3 nylon bolts, 8 8-32 bolts and M3 standoffs, and you've got a frame. It's got a top and bottom plate, a battery plate, 8 motor mounts, 2 legs (need to be heated and bent for acrylic) and an electronics guard plate.

Multicopter engine vibromount

rcFlyrodeo — Sun, 02 Dec 2012 09:00:56 GMT

Very effective and lightweight anti-vibration mount for multicopter engines on the arm/rigger. Needs special rubber grommets and screws which cost about 1$/engine. The material is 1.5mm plywood (birch, aviation quality) to cut with laser and does the job perfectly. The 181x181mm only available version of plywood at ponoko makes possible cutting 8 sets for an optocopter. Who buys the plan gets also the CNC file for cutting it from G10 or CF (see picture) per email. (Unfortunately Ponoko does not allow uploading CNC files for 1.5mm drill bit and selecting G10 or CF). Max engine outer diameter is 32mm, mounting holes are for 16/19/25mm distance