Ponoko - All items tagged with eurolite

aVoid Coasters

DesignedbyBlair — Sat, 09 Apr 2011 16:52:09 GMT

aVoid is a simple and elegant set of 6 coasters. aVoid takes note of modern architectural elements like the Voronoi pattern. Random points are represented by spatial voids which create a unique mixed pattern of free form and natural geometric shapes. I used the pattern's graphic element as the form of the product. approx 4" x 4" Shown in Black Acrylic *Price does not include shipping.

"Hands" Corner-Shelf

StudioWun — Fri, 28 Aug 2009 19:01:09 GMT

The "Hands" Corner Shelf is what FUN looks like, if it were made of furniture. The shelf is made from 5 interlocking pieces of eurolite plywood (or MDF). It mounts easily to any 90° corner with 4 drywall screws, and when it is assembled (without tools or glue) the mounting screws are hidden from view. The item displayed was stained with a light maple color to enhance the wood grain. Eurolite can be stained any color or can be left it's natural color. (Shown in the second photo.) Dimensions: At it's widest point, the shelf is 12" across, 6" deep, and the hands are 7.8" from top to bottom. The shelf piece has a small notch in the back to run a power cord for a clock or small lamp. For diversity, the shelf piece can be stained a different color on each side and can easily be flipped over within 30 seconds. Once the shelf is locked in place, it is very sturdy.

Mini Spice Cabinet

Chromatophobic — Thu, 02 Jun 2011 03:30:12 GMT

You can make your own mini spice cabinet with sliding doors. The cabinet is designed to be cut from a 4mm material such as Eurolite Poplar. It measures H108mmW378mmD80mm. The depth and height are largely constrained by the P2 template, but the height can be increased, although that will require taller doors that won’t fit on a P1. Most of the joints in this design are interlocking, so little glue is required to hold everything together. To assemble this cabinet you will require: • PVA or wood glue • Small model making clamps or bulldog (stationery) clamps for clamping small pieces • F-clamps or masking tape for holding together final model Assembly instructions: 1. Slot in + glue top door guides [2+3] into top [1] = [1+2+3]. The raster engraved grooves should be facing up toward the guides 2. Glue bottom lining [7] to bottom [6] on the grooved side = [6+7]. Side and back tab edges should be perfectly aligned. 3. Glue together the back [6+7] and top [1+2+3]. The back piece [6+7] should be facing in the same direction as the door guides [2+3] 4. Slot + glue back top support [5] into back [4]. 5. Glue bottom lining front strip [8] to [6+7] on the grooved side. Align with front edge with side edges protruding evenly 6. Glue together back [9] to bottom assembly [6+7+8]. The back piece [9] should be facing in the same direction as the raster engraved grooves and the lining and guide pieces [7+8] 7. You now have the bottom and top parts assembled. Next is attaching these to the sides 8. Slot in and glue top [1+2+3+4+5] and bottom [6+7+8+9] to one of the sides [10]. Works best when the side piece [10] is lying flat, and the other components are insterted into the slots from above 9. Place the other side [10] flat on the working surface and insert the assembly into the slots. This is a tight fit, so you may need a rubber mallet or something heavyish on hand to help with the slotting. 10. Either use the f-clamps to hold everything together while the glue sets, or tightly wrap masking tape around the box 11. Allow at least 12 hours for the glue to dry. Sand off any messy glue globs, prime and paint the cabinet. 12. Once the paint is completely dry, insert the sliding doors. Additional notes: The only pieces that have different front and back are the top [1] and the bottom [6] pieces. Try assembling the parts first without gluing to make sure you’re comfortable with the assembly. The tabs are designed for a tight fit, so perfect alignment is important. Making cost: This is for 4mm poplar and 3mm clear acrylic. Cabinet materials = $8.00 , cabinet making = $18.73 , Doors material = $2.15, doors making = $287