Ponoko - All items tagged with Planter

Endoplasm Hanging Planter

pollen — Thu, 21 Aug 2008 01:08:31 GMT

The Pollen Endoplasm is a light weight hanging planter made from Italian Poplar ply, It is designed to string together with other Endos to form daisy chains of greenery in and around your home. The Endo measures 395wx375h mm. Follow the steps in the photos to assemble your planter. You will need 3mx2mm synthetic chord to make the hanger. By cutting 1m off and using together with the remaining 2m length you can form a loop for hanging. Pay special attention to the knots used - this figure 8 knot loosens off easily for adjusting the level later. Staining and or coating your planter will extend the life of this untreated plywood, I used a red wood dye and boiled linseed oil.

Pocket Planter

5P3l6F9j — Fri, 06 Apr 2012 21:12:32 GMT

This is the Pocket Planter, a planter that could be assembled into a single, double, or triple vessel for plants. The joint system I designed would allow a relatively simple assembly and disassembly, depending on the needs of the user. Different variables are possible: a closed planter, an open triple one, three separate ones, two connected ones with a separate one, etc.

Reaction Planter - Math Decor by Dizingof

Dizingof — Mon, 07 Jan 2013 17:15:12 GMT

A 2 parts unique planter: A base which holds a square wet sponge and a beautiful mathematically generated complex mesh which simulates a natural reaction of 2 chemicals. First cut a 80x80x10mm square sponge, put it inside the square cavity in the base - wet it then put on it few of your favorite Plant Seeds. Put the Reaction Mesh part on top the base and let nature do its course. When the seeds starts to grow they will engulf the Reaction mesh thru the complex mesh in&out. 3D Print both parts with your favorite material OR 3d print them using your personal 3D Printer with white ABS/PLA

Cells Planter for Glazed Ceramics - By Dizingof

Dizingof — Sun, 05 May 2013 02:12:25 GMT

Beautiful organic Cells structure engulfing a planter. A design technique using a cluster of Tetrahedral Math shapes. Size: 130x130x130mm Wall thickness: 6mm Surface volume: 136 cm^2 Designed for Glazed Ceramics but as good for other materials including ABS/PLA on your home 3D printer.

Jet Vase/planter By Dizingof

Dizingof — Sun, 19 May 2013 08:03:09 GMT

Based on the Math surface called Jet.. Size: 150x150x170mm Thickness: 3mm (all over) 3D Print it with your favorite material.