Watsdesign - showroom of unique products for sale on Ponoko

Foldarap 1.1 Lasercut-parts

Watsdesign — Sat, 18 May 2013 00:51:00 GMT

See the http://reprap.org/wiki/FoldaRap Choose a 4-6 mm thick material (e.g. : acrylic or wood)

Foldarap 1.0 Lasercut-parts

Watsdesign — Mon, 29 Apr 2013 18:53:58 GMT

See the http://reprap.org/wiki/FoldaRap Choose a 3mm thick material (e.g. : MDF wood)

S12-3mm-v0.1 Ponoko-p2

Watsdesign — Sun, 02 Dec 2012 18:41:35 GMT

In 2008 I made the first tree of this kind, and always wanted to upload it. The idea behind is to have more than 2 pieces slotted together and finally to obtain something closer to a real tree. To build your mini-christmas-tree, just stack the panel from 1 to 6. It may also serve to hang little jewelry and you can combine different trees together to mix colours/materials :)

Shelves For Small Containers (5x4) - Blueprint

Watsdesign — Sun, 09 Oct 2011 23:02:51 GMT

Little shelves to hold 20 small containers http://www.thingiverse.com/thing:12177 (16 of 30mm and 4 of 40mm height) The main picture shows the model I made for myself (3mm plywood and 5mm acrylic and a little oversized with 30 containers), the model here is intended to be made in 5mm material (e.g. 5mm MDF). 1) Put together the sides and the shelves 2) Then the bottom and upper plate 3) add the long parts of the back 4) fix every mortise and tenon with a little peg 5) Print small containers with your RepRap and organize your stuff :)

Reprap Thick Sheet-01

Watsdesign — Sat, 30 Oct 2010 09:22:10 GMT

The needed board to build a reprap (considering we use a gen6 board that mean : bed + "frog" + purge plate + pcb's board) Refer to the wiki (http://www.reprap.org) for more info :)