Sun, 19 May 2013 11:02:25 GMT Ponoko - Items by TerawattIndustries tagged with arduino mini http://www.ponoko.com/showroom/TerawattIndustries/8010 Arduino Pro Mini 5v/16Mhz with (2x) custom enclosure and USB Micro breakout board for power. Comes with hardware listed. Shipped to you from Ponoko and Sparkfun. Parts include: Parts: - 1x Arduino Pro Mini 5v/16Mhz - 2x Acrylic Enclosures (see below) - USB Micro Breakout Board - Assembly hardware - Assembly instructions - 10x 4-40 bolts; - 10x 4-40 standoffs 1/2" - 4 Silicone pads (feet) Enclosure: - Dimensions: 64mm x 45mm x 25.5mm - Your choice of Green, Pink, Blue - Case has cutout for female or male headers on all pins except A4, A5. - One (1) cutout for USB-Micro. (3mm x 8mm) - One (1) cutout for square IC/Sensor for ex: light sensor, LED. (2mm x 6mm) - 2x acrylic L-bracket for mounting Arduino to case. - Assembly instructions Enclosure is assembled with glue on the bottom and four (4) sides. The top is fastened by 1.25" screws + nuts. You'll need cement or glue that works with acrylic. The Arduino chip is mounted to the enclosure with an acrylic L-bracket that comes with the kit. The USB Micro breakout board is fastened with (2) screws and bolts. Due to the way Sparkfun and Ponoko package some hardware you might have leftover hardware.<br></br><img alt="Promini_green_3_showroom_image" src="http://static0.ponoko.com/design_images/images/48087/871f9280-7c4a-1781-0c36-088535ac8054/promini_green_3_showroom_image.jpg?1337977790" /> Fri, 21 Sep 2012 22:02:13 GMT http://www.ponoko.com/showroom/TerawattIndustries/8010?time=Mon+May+21+20%3A41%3A46+UTC+2012 TerawattIndustries http://www.ponoko.com/showroom/TerawattIndustries/6401 To see how the Arudino Pro Mini (or Pro Micro) fits go to our showroom and view the "arduino-mini-pro-kit-w-large-case". The listed price is for one (1) pre-assembled case for Arduino Mini Pro 5v/3.3v. Arudino Pro Mini and USB Breakout Board not included. The case is held together with glue and bolts (4-40 x 1.25"). A small acrylic L-bracket is included to mount the Arduino to the case. Features include: - H/W/D: 64mm/45mm/25.5mm - Case fits Pro Mini or Pro Micro - Case has cutout for female or male headers on all pins except A4,A5. - Two (2) cutouts for USB-Micro. (3mm x 8mm) - One (1) cutout for square IC/Sensor for ex: light sensor, LED. (2mm x 6mm) - One (1) acrylic L-bracket - allows mounting of Arduino to case without glue. <br></br><img alt="Img_0377_showroom_image" src="http://static1.ponoko.com/design_images/images/48087/553b9109-b555-534c-8da3-25d1fe58eeda/img_0377_showroom_image.jpg?1321785963" /> Fri, 25 May 2012 20:15:40 GMT http://www.ponoko.com/showroom/TerawattIndustries/6401?time=Sat+Sep+17+02%3A46%3A09+UTC+2011 TerawattIndustries