Ponoko - Items by PhenomEngineering tagged with Acrylic

Raspberry Pi Mount

PhenomEngineering — Mon, 04 Mar 2013 04:11:56 GMT

This prototyping mount is perfect for holding a Raspberry Pi (Rev B) and a large (830 pin) breadboard. This mount is perfectly designed to allow access to all components of the Pi, including installation and removal of the SD card. The mount measures 7.2in (~183mm) x 6.5in (~165mm). It is made from acrylic that has been ESD treated. The mount sits on four pads, one at each corner, to keep the mount from sliding around on workbench surfaces. The board is held in place with two screws, four spacers and nuts, which are also included. The only thing you need to do is install your Raspberry Pi and breadboard, and get to building great projects! Visit http://www.prototypingmounts.weebly.com for installation instructions and mount information. Your purchase includes: 1 Mount 1 Set of Hardware

Logo Display

PhenomEngineering — Sun, 22 Jan 2012 01:12:07 GMT

This lighted display is a very sleek and elegant way to show off your logo or any other design. This display is powered through a 5V wall adapter, but can be powered with any adapter with a barrel jack. Color choices for the LEDs are blue, white, yellow, red or green. This item will be made to order. Once I receive your logo or request, it will take a few days to get it set up for cutting. Expect 15-25 days from order placement to delivery. Prior to ordering, send your desired design. We will work to put it into a cutting file for your approval.

Lilypad Mount Adapter

PhenomEngineering — Sun, 08 Jan 2012 20:03:40 GMT

This LilyPad adapter allows you to mount an Arduino LilyPad to Phenom Engineering's Large and Standard Mounts (may also mount to other company's holders). The adapter holds the LilyPad using four integral spring clips. Due to the variability of the diameter of the board, the LilyPad may sit loosely in the adapter. The adapter is made from clear acrylic that has been ESD treated. It is secured to the mount using two screws and nuts, which are included. The mount will ship disassembled due to the damage that can be caused during the shipping process to the clips. The only thing you need to do is install the two clip pieces to the base, install the adapter to a mount and set in your LilyPad, then get to building great projects! This item includes: 1 LilyPad Adapter 2 Screws 2 Nuts

Arduino Mega Mount

PhenomEngineering — Fri, 18 Mar 2011 19:30:06 GMT

All Mega mounts are in stock - Available for immediate shipping. Tired of having to hold your Arduino board while you connect the USB and other leads? Tired of trying to keep it from sliding across your work bench? This large mount is perfect for holding an Arduino Mega, a small (400 pin) breadboard and a large (830 pin) breadboard. The mount includes everything shown in the picture. The mount measures 7in (~177mm) x 6.5in (~165mm). It is made from acrylic that has been ESD treated. The mount sits on four pads, one at each corner, to keep the mount from sliding around on workbench surfaces. The setup does not include a clear cover like the other mounts, due to the layout of the pins. The board is held in place with three screws, spacers and nuts, which are also included. The only thing you need to do is install your Arduino and breadboards, and get to building great projects! If you are looking for something custom for your application, feel free to email me.

Arduino Mount (Large)

PhenomEngineering — Thu, 10 Mar 2011 14:58:40 GMT

All large mounts are in stock - Available for immediate shipping. Tired of having to hold your Arduino board while you connect the USB and other leads? Tired of trying to keep it from sliding across your work bench? This large mount is perfect for holding an Arduino Diecimila, Duemilanove or an Uno, a small (400 pin) breadboard and a large (830 pin) breadboard. The mount measures 7.2in (~183mm) x 5.3in (~135mm). It is made from acrylic that has been ESD treated. The mount sits on four pads, one at each corner, to keep the mount from sliding around on workbench surfaces. The setup includes a clear cover for the Arduino to keep FOD out and fingers off the components, while allowing the LEDs to be seen. This cover rests on a pair of stand offs and is held in place with two screws and nuts, which are also included. The only thing you need to do is install your Arduino and breadboards, and get to building great projects! If you are looking for something custom for your application, feel free to email me.

Arduino Mount (Standard)

PhenomEngineering — Thu, 10 Mar 2011 14:57:41 GMT

Black and Blue In Stock - Available for immediate shipping The clear standard mount has a 15 day lead time. Tired of having to hold your Arduino board while you connect the USB and other leads? Tired of trying to keep it from sliding across your work bench? This mini mount is perfect for holding an Arduino Diecimila, Duemilanove, or an Uno and a small (400 pin) breadboard. The mount includes everything shown in the pictures with the exception of the electronic components. The mount measures 5.4in (~137mm) x 3.95in (~100mm). It is made from acrylic that has been ESD treated. The mount sits on four pads, one at each corner, to keep the mount from sliding around on workbench surfaces. The setup includes a clear cover for the Arduino to keep FOD out and fingers off the components, while allowing the LEDs to be seen. This cover rests on a pair of stand offs and is held in place with two screws and nuts, which are also included. The only thing you need to do is install your Arduino and breadboard, and get to building great projects! If you are looking for something custom for your application, feel free to email me.