EdgarCastelo - showroom of unique products for sale on Ponoko

Fonly-ish Lathe basic parts

EdgarCastelo — Thu, 18 Apr 2013 08:40:57 GMT

A CNC plate-cut take on the glorious Fonly Lathe. Hey, since we can, let's make use of every aspect of the Fabbing Revolution, to improve our Workshop... Use one cut for 6mm plate, or 2 cuts for 3mm.

Ray Gun, tried and tested

EdgarCastelo — Wed, 20 Mar 2013 17:32:45 GMT

A homage to all those cool Sci-Fi movies, a Fluorescent Acrylic Ray Gun, with place for Electronics on the box, and a hole trough the Barrel, to place the Laser Pointer, LED, whatever. You can use a Rubber Band as the Trigger spring, and it will also hold the back lid in place!

Elastomatik One Plate build

EdgarCastelo — Thu, 14 Mar 2013 16:56:52 GMT

A cheaper way to make your elasto, all in just one material.

4 Halbach Linear frames

EdgarCastelo — Sun, 09 Sep 2012 19:27:20 GMT

The pieces for four Linear Halbach Magnet Arrays, for 10mm Magnet Cubes. The base shows the proper orientation, for each Magnet. Looking at the arrows, with both outer arrows pointing left, the bottom side is the strongest side. See how it works, at: http://youtu.be/fP9Am8r1ClM

Halbach 12 Magnet Laser cut

EdgarCastelo — Sat, 08 Sep 2012 18:42:36 GMT

1 - Put the Arrow piece, the one with the Magnet Axis Directions, on the bottom. 2 - Put the first Square piece, the other pieces, with the square holes, aligned and on top of that. Glue the two, on the outside. 3 - Using 4 Magnets as place holders, stack the other 3 Pieces, and glue the lot on the outside. 4 - After finding the North of each Magnet (a Compass South poit points to it) mark it with a Permantent Ink Felt Marker. 5 - Put the Magnets carefully, the arrows point to the North, put them, first 4 spaced 3 places apart, glue the top, then 4 to the right of those, glue again, then the remaining 4 glue again. That's it! :)

Dratfsman Sketching Aid Box

EdgarCastelo — Fri, 24 Aug 2012 06:34:58 GMT

You can learn to draw, with this.

Pen & note, a Pen holder for your Notebook

EdgarCastelo — Thu, 02 Aug 2012 07:16:04 GMT

A Pen holder for your Notebook, so you never lose the Pen! You can hold the Pencil/Pen/whatever on top or to the side of the Notebook. 1 - Plug the slotted part onto the side of the Cardboard back of the Notebook; 2 - Either place the round part, the Pen holder, on top of the Notebook, as on the image, or rotate it and slide it into the side of the Notebook

BusStopper Pop-Up Segment Model

EdgarCastelo — Sat, 09 Jun 2012 15:34:53 GMT

Segments pop up, they appear, pop down, they disappear. Couldn't be simpler! Cut the 3 Digits drawing, Bus2 02, on a thick material, and print the segments template, Bus2 01, on Cardboard, bending over the grey lines, and the middle of the black part. Rivet the holes, you got a Bus Stopper!

Raspbery Pi Case

EdgarCastelo — Thu, 22 Mar 2012 20:04:22 GMT

A case for the Raspberry Pi, with an a hole for locking it, cable pass-trough slots, optional holding pieces, and even a tag plate!

ElastomatiK plans

EdgarCastelo — Wed, 22 May 2013 15:32:18 GMT

A 6 shot, semi-auto, Rubber Band Gun. All in Laser-Cut Plate, add a rubber band box, and you're set! Even the spring is a rubber band.

3D Styro cutter

EdgarCastelo — Thu, 23 Feb 2012 17:36:22 GMT

A Styro Cutter with a twist... 360º of it! :D It cuts 12 facets from 12 parallel views around a 3d Object, then it's up to you to sand out the faceted edges.

Slingshot

EdgarCastelo — Fri, 07 Oct 2011 10:41:06 GMT

Just add the leather pouch and the 2 Rubber tubes, assemble it as shown on the second picture, that's it! ...For the Personal Factory, follow these simple steps: 1- Download the file; 2- Make 3 extra copies of it; 3- in each one of the copies, keep the original at all times, delete somew parts: 3a- First the add-ons, keeping the Slingshot; save it as part 1 3b- Then, on another copy, delete the Slingshot, and the pouch add-ons, and one of the Slingshot add-on, keeping just the other, save it as Part 2, 3c- Then on the last copy, delete all but one of the pouch pieces, save it as Part 3. Thẽn you manufacture each part, Slingshot 1 time, the other parts 2 times, or more, for spares.

Fractal Puzzle Triangles P2

EdgarCastelo — Mon, 24 Jan 2011 17:26:31 GMT

A Stencil that produces fractals, according to the Boolean XOR truth table. The price for making this is, at the time I'm writing this, $19.49 See the table, draw the triangles, have fun!

Non-Stop Gauss Gun P1

EdgarCastelo — Mon, 15 Nov 2010 16:26:26 GMT

Why stop adding one more Gauss Gun to your monster Gauss Gun set, because you've starting to smash the Neodymium Magnets? Just build this Project; As the magnet isn't touched by the roller balls, there are no speed or force limits! And to re-set it, just push the spheres forward, no hassle! It has it's dimensions set for a 12.7 mm Neo, but you can buy any size, draw a square into the plans, as a template, and scale it until it fits the plan's square.

Ellipser Mark I

EdgarCastelo — Tue, 12 May 2009 10:49:03 GMT

An Ellipse, Circle, and Spiral drawing reel. For large drawing work, on wood boards, walls, floors, etc. See the instructions.