Ponoko - Items by Chromatophobic tagged with chromatophobic

Felt Shoulder Bag

Chromatophobic — Thu, 28 Apr 2011 03:25:14 GMT

This file is the cutting pattern for this felt bag, which is designed for an A4 fit. The bag is designed to be hand stitched together with ease, as the stitching holes are lasercut to ensure perfect, evenly spaced stitching. The design is for 3mm felt. The photos show the engraved version of the bag, but the engraving design has been removed from the design file, so you can add you own pattern. The design takes 10min 19sec to cut without any engraving (even faster if you’re cutting a solid panel rather than three strips), and the designs can be fitted onto a P3+P2. Of course, you can use 3x P3’s of different colour felt to make two bags with contrasting panels. To complete the bag you need: • 40mm wide belt buckle for the strap • 2 snap domes • Thick industrial thread (double layer) Assembly notes: 1. Stitch the three panels together creating the main part of the bag. Length of the thread should be about six time more than the seam length, so there will be several stop/starts for each seam. Don’t make the thread too long or it will tangle. 2. Hammer on domes, making sure they face the right way 3. Sew in buckle for the strap and stitch the straps together 4. Attach straps to side panels 5. Attach the side panels to the main part

Leather Camera Case

Chromatophobic — Fri, 15 Apr 2011 03:29:31 GMT

This file is the cutting pattern for this leather Camera Case, which is designed to fit a point and shoot camera that's 97mmW x 62mmH x 23mmD. The case is designed to be hand stitched together with ease, as the stitching holes are lasercut to ensure perfect, evenly spaced stitching. The design is for 2.5mm Russet leather, although thinner leather can be used. The photos show the engraved version of the camera case, but the engraving design has been removed from the design file, so you can add you own pattern. The file does not include the strap. The design takes 1min 19sec to cut without any engraving (cheap!), and three designs can be fitted onto a P2. If you are adjusting the design for a slightly smaller camera, it should be possible to fit four designs onto a P2. To complete the case you need: • 10mm rivet if you’re making a strap and using 2.5mm leather • Snap dome (you will need a washer to pack the shank if you’re using thin leather • Thick industrial thread (double layer) Assembly notes: It’s easiest to start the stitching at the opening, sew down to the bottom corner and reverse back to the opening. This will make it easier to tie the end knot. Length of the thread should be about six time more than the seam length.

Rubik the Retarded Raven kinetic pendant

Chromatophobic — Mon, 18 May 2009 20:55:09 GMT

Rubik the Retarded Raven was conceived during a drunken haze, and is an unfortunate victim of the foetal alcohol syndrome. He somehow mastered the art of flying, or rather flapping his wings, but has to be kept on a chain to shelter him from harm. He has a strange fascination with banjos and doesn't know eyes from strawberries, so watch out! Pendant dimensions: 95x45 (approx) Production run: 20. Rubik's unique production number is etched on the back of the pendant.

Snoork Cufflinks

Chromatophobic — Wed, 25 Nov 2009 21:57:10 GMT

Snoork cufflinks in black, white or red.

Syringe Cufflinks

Chromatophobic — Wed, 25 Nov 2009 21:56:21 GMT

Acrylic syringe cufflinks.

Pendant

Chromatophobic — Mon, 18 May 2009 20:57:38 GMT

Twin colour acrylic pendant 42mm in diameter.

Erik brooch

Chromatophobic — Wed, 25 Nov 2009 21:57:57 GMT

You are looking at Erik: 1_1b_06 (the smaller image) Erik is part of the Grimlies series, and he is a pretty mischievous kid. He gets his kicks by booby-trapping his neighbour’s garden with a variety of ingenious devices and then observing the ensuing chaos from his treehouse. Brooch dimensions: 53x20 Production run: 20. Erik’s unique production number is etched on the back of the brooch.

Free Snowflake

Chromatophobic — Sat, 19 Apr 2008 06:49:51 GMT

Snowflake: Xmas tree decoration ...or jewellery ...or packaging component.

50mm snowflake

Chromatophobic — Mon, 18 May 2009 20:59:40 GMT

Acrylic Snowflake Christmas tree decorations (or whatever else you want to use them for). Ten different designs (shown in order). Size: 50mm diameter. Colours: black, opal, grey tint, clear, red tint. The price is for one 50mm snowflake.

30mm snowflake x2

Chromatophobic — Mon, 18 May 2009 21:01:18 GMT

Acrylic Snowflake Christmas tree decorations (or whatever else you want to use them for). Ten different designs (shown in order). Size: 30mm diameter. Colours: black, opal, clear, smoke, green edge, clear red. The price is for THREE 30mm snowflakes of choice.

Skull buttons

Chromatophobic — Mon, 18 May 2009 21:02:54 GMT

Spooky Skull shirt buttons (but you can sew them onto anything!). Size: 12mm, Colours: black, opaque red, clear red, white, opal, mirror, clear

Snoork brooch

Chromatophobic — Wed, 25 Nov 2009 21:58:37 GMT

You are looking at Snoork who is part of the Grimlies series. Snoork is a drooly, super-cute lovable puppy. He never uses his sharp teeth to bite anyone. He does not resort to aggression to get revenge. Instead, Snoork poops inside the perpetrator’s shoes. Brooch dimensions: 53x40 Production run: 40 - each brooch is individually engraved with a number on the back. NB: more colour combinations are available.

Piggy buttons

Chromatophobic — Mon, 18 May 2009 21:04:53 GMT

Pudgy Piggy shirt buttons (but you can sew them onto anything!). Size: 16mm, Colours: black, clear red, white, opal, mirror

Ghost buttons

Chromatophobic — Mon, 18 May 2009 21:05:33 GMT

Gawky Ghost shirt buttons (but you can sew them onto anything!). Size: 12mm Colours: opaque red, clear red, opal, mirror

Zik Brooch

Chromatophobic — Wed, 25 Nov 2009 21:59:10 GMT

You are looking at Zik who is part of the Grimlies series. Zik is only a baby. He loves hunting bugs. He also loves eating them. Though Zik often eats too many and makes himself sick. Brooch dimensions: 39x24mm Production run: 20. Zik’s unique production number is etched on the back of the brooch. Note: actual colour scheme may differ from item shown, but enquiries are welcome:)