Clear PETG
PETG (Polyethylene Terephthalate Glycol) has high Impact strength and is reasonably flexible. It can be formed with and without heat although tight bend radii could result in splitting and stress marks on along the folded edge. Caution is advised for very detailed, intricate cut outs & large areas of engraving as the build-up of heat can cause the sheet to deform. Line engraving is favored over area engraving and intricate details are not recommended.
Same day turnaround
Design specifications
Maximum sheet size
31.1 x 15.1in
Kerf width
0.01in
Minimum thickness
0.04in
Maximum thickness
0.04in
Minimum overall part
0.24in
Minimum feature size
0.08in
Minimum engraving detail
0.04in
Mechanical properties
Ultimate tensile strength
67 MPa
Yield strength
53 MPa
Young's modulus
2.2 GPa
Elongation at break
30 %
Hardness
115 (R scale)
Physical properties
Corrosion resistance
Good
Magnetism
No
UV resistance
Fair
Density
1.38 g/cm³
Light transmission
86 %
Electrical properties
Electrical resistivity
16 x 10^15 Ohm.cm
Post treatments
Affixable Properties
Chemical, Mechanical
Thermal properties
Maximum service temperature
63 ºC
Thermal expansion coefficient
68.4 µm/m-°C