Ponoko

Acrylic - White (Matte 1-side)

0.118 inches

555_edges_usa_acrylic_white_large_large
There are 5 images for this material

What is it

Acrylic (PMMA) is a thermoplastic that is available in a wide range of colors including transparent tints and clear to opaque solid colors.

Acrylic has a thickness tolerance of +/-15% of the material thickness.

Orders using this material will ship as fast as same day. Find out more.

GET A SAMPLE

Design notes

This variety of Acrylic has a matte finish on one side and a glossy finish on the other. By default the material will be placed matt side up in the laser so any engraving will be on the matt side. if you want to engrave on the gloss side, make a note in the shipping instructions for your order.

If you want to engrave on the gloss side, make a note in the shipping instructions for your order. Engraving on the gloss side can only be done through the protective backing paper, so only heavy raster and vector engraving are suitable.

Acrylic retains detail when laser cut and it engraves well. For tips on engraving see this blog post.

Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. This is most evident if parts are small or thin. Details should not be smaller than 1mm/0.04" as they are likely to be too fragile.

Adding radii to corners can reduce the risk of breaking. For some tips on how to design for acrylic see this blog post.

Acrylic can scratch easily and should be cleaned with a mild solution of dish detergent and warm water. Never clean with a other cleaners not suitable for acrylic or with a dry clot

Typical uses

Acrylic is commonly used as signage, glazing and in building applications, fabricated point of sale displays, menu holders, display cabinets, machine guards, furniture inserts, aquariums & fish tanks, jewelry and tableware.

Environmental info

Acrylic is non toxic and recyclable in some areas.

Adhesives, joints & fastenings

Acrylic can be joined with epoxy, Weldon 3, 16 and 40. Dichloromethane and chloroform. Screw joints should be pre-drilled to avoid splitting.

Tips from other designers


Sign up for our newsletter
to get special offers: