Ponoko

Mini Metal Gearmotor 100:1

Cost: $12.95 each

044021_file_2
There are 4 images for this hardware

Description: This motor has a 0.275" (7 mm) D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The face plate has two mounting holes threaded for M2 screws.

These motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

Features:

  • 100:1 gear ratio
  • 140rpm @6V
  • 60mA @ 6V
  • 26 oz inches torque @6V

Documents:

SKU: ROB-08912


Sign up for our newsletter
to get special offers: