Make

Description: This is a large mass of items that go along with the Beginning Embedded Electronics lectures. The ATmega328 is now included in this kit. This new pin-compatible Atmel microcontroller has substantially more flash memory than the ATmega8.

This kit will includes the following parts.

Note: You will need a parallel port to use this kit. If you have a laptop, chances are you don't have a parallel port. If you don't, you might want to get the Pocket Programmer listed below which will allow you to use this kit without a parallel port.

ATmega8 Lecture:

• ATMega328
• AVR-PG2 Programmer
• DB25 6 foot extension cable
• 16MHz crystal
• 22pF capacitor x 2
• Reset Button x 2
• 10k Resistor x 5
• LED x 2
• 330 Ohm Resistor x 3
• Capacitor 0.1uF x 2

SKU: KIT-08391