Ponoko

ClockIt

Cost: $24.95 each

204559_file
There are 5 images for this hardware

Description: This is a great kit to learn the basics of soldering. ClockIt is a basic alarm clock with buzzer based on the ever popular ATMega328. If you're just learning how to solder, this kit should take you 15-20 minutes. If you're a weathered pro at soldering, this is a great relaxing build that should take 5-10 minutes.

We've made some changes to this kit so it's easier for beginners to solder: The ATMega footprint is wider so you don't need to bend any pins and we've also added some more silkscreen print to better indicate the polarity of the parts.

No programmer required. The ATmega comes with firmware installed!

Features:

  • Time (AM/PM)
  • Alarm (On/Off)
  • Snooze (alarm resumes after a 9 minute snooze)

Kit Includes:

  • 1 x ClockIt PCB
  • 1 x ATmega328 (pre-programmed)
  • 1 x 4-digit display
  • 1 x buzzer
  • 1 x 10uF cap
  • 1 x 0.1uF cap
  • 2 x 22pF caps
  • 1 x 10k resistor
  • 1 x 16MHz crystal
  • 1 x barrel jack
  • 1 x mini power switch
  • 3 x push button reset switches
  • 2 x Screws
  • 2 x Plastic Standoffs
  • 1 x 5V wall wart

Documents:

Replaces: KIT-10013

SKU: KIT-10930


Sign up for our newsletter
to get special offers: