Ponoko

Electronic Dice Kit

Cost: $19.95 each

174628_file_2
There are 4 images for this hardware

Description: The Dice Kit is a beginner's soldering kit that comes with everything you need to make your own electronic die. When you tap it on the table, it displays a number from 1 to 6 by lighting up the appropriate number of LEDs in the same layout as found on traditional non-electric dice.

The kit uses a piezo element for detecting the tap on the table and uses a pre-programmed microcontroller. It also includes a laser cut acrylic base and battery. There's no programming required and a beginner can get the kit together in about an hour or so. You will need a soldering iron and basic tools. Also, a dab of glue or double-sided tape is recommended as well.

Features:

  • Auto power saving sleep mode after ~15 seconds of inactivity.
  • Laser cut 1/4" acrylic base
  • Includes CR2032 battery
  • Stand alone kit
  • No computer needed
  • No Arduino needed
  • Easy to build

Documents:

SKU: KIT-10212


Sign up for our newsletter
to get special offers: