Ponoko

LinkSprite JPEG Color Camera TTL Interface

Cost: $49.95 each

234544_file
There are 10 images for this hardware

Description: The LinkSprite JPEG color camera allows you to capture and output JPEG images through UART, making it easy to integrate into an existing design.

Note: Cameras purchased before November 01, 2010 output RS232 serial data, so you will need a level converter if you plan on connecting it to an Arduino or other microcontroller. See the related items for an appropriate converter. Cameras purchased after this time use a TTL interface.

Note: These only work reliably with a 5V power supply, even though the manual states they can work at 3.3V. If you want to use it at 3.3v, you will need a lower baud rate. Check the comments for more information.

Features:

  • VGA/QVGA/160x120 resolution
  • Support capture JPEG from serial port
  • Default baud rate of serial port is 38400
  • 5V power supply
  • Size 32X32mm
  • Current consumption: 80-100mA

Documents:

SKU: SEN-10061


Sign up for our newsletter
to get special offers: