These are Ponoko ready .svg files for the do it yourself cintiq Enclosure Kit for the Wacom Intuos3 A4 Tablet. This enclosure is assembled using super glue.
You will also need to purchase separately:
1) A BOE HV150UX1-101 UXGA 1600x1200 res (15 in screen 4:3 aspect ratio) OR LP150E05-A2K1 1400x1050 res (14in 4:3 aspect ratio).
2) An LCD Controller with VGA inputs - R.RM5451 (VGA+DVI controller).
Slot pan head screws & nuts made of stainless steel A2.
4 x M4 x 40mm
7 x M3 x 12mm
(The above fasteners can be obtained from http://stores.ebay.co.uk/astleycomponents)
6x PC case screws - any computer component store
4) 5mm foamboard to cut and measure the screen positioners.
5) 2 x CCFL extensions.
You can source your panel from http://www.tjinspirations.co.uk/ . Be sure to specify that it be the exact model and not a "compatible one".
You can source your controller from http://www.njytouch.com/ContactUs.htm . http://www.ebay.co.uk/sch/njytouch/m.html . Let them know the model of the panel you will use. Ask them about CCFL extensions.
There are of course other sources but these are the ones TabletMod has verified.
For general information about DIY Cintiqs, visit www.TabletMod.com
Assembly video is located here:
http://www.youtube.com/watch?v=iYwsFiVbHi8 **Please Note** this video shows the assembly of the older generation TabletMod Large V2 - this is the same pattern as that for the Intuos3 A4 (9x12).
Calibration Guide is here:
How to use the design files in ponoko? See the following video from 9:11 http://www.youtube.com/watch?v=ZY5cF8O_ky4
You will need to use 3mm thick material. Be sure to use 3mm clear acrylic for p3dti3a4v2topbuttonbox003mm.svg .
Also wash hands before gluing the kit together. Skin oils can react with the glue vapours and leave prints and smudges on the acrylic.
Please note, as this is a digital download please be sure to purchase the correct design files you need as we cannot issue a refund.