This is a custom case for photoduino proyect.
It will fit with v1.0 and v2.0 photoduino shield.
Holes for sensors in one side and outputs in the other side.
Holes matching with standart LCD (need 10mm spacer) and A&B bottons in the front side.
Holes matching with the arduino Duemilanove or similar (10mm spacers) in the bottom.
Holes in the rear side matching 9vDC input and USB input.
All with 3m screws
Ready to be done in clear acrylic easy to mount case. Desing based in my first case (3,5" diskette case) so it have similar dimensions.
You can mount and use it, can glue the four sides and the bottom, or screw all of them drilling in the side holes.
With this schema you can cut it wherever you want. And in any material, so be careful, front side must be clear for the lcd, o you can make a hole.
It is designed with the ponoko standart rules and tips, so you can check it to know what are you buying.