Design your own products with Ponoko

Arduino Pro Micro 3.3v/8Mhz (https://www.sparkfun.com/products/10999) with a ultralight and protective enclosure. The Pro Micro is shipped from Sparkfun, with the enclosure shipped from us. This case is tiny. It hugs the board within 1mm on each side. There's a port for the USB micro and ports for male or female headers on the Arduino. There's really no need to take the Arduino out of this case unless you want to place special jumpers.

The case is easily assembled with 2-56 bolts provided in kit. Optionally you can place a dab of glue on the top/bottom corners if you'll open the case often.

We're still working on pictures for this assembly.

Includes:
- H/W/D: 38mm/32mm/9mm
- Wall thickness: 2mm
- Arduino Pro Micro 3.3v/8Mhz
- One port for USB Micro
- One set of ports for female/male headers attached to Pro Micro.
- 8x foot/acrylic-washer/2-56 bolt assemblies with extra washers.

The enclosure is shipped from Ponoko. The rest is shipped from Sparkfun.